Part Number Hot Search : 
ADF41 332BE MAX5421 D6020L 24C256BN GRM21 N34DR GSM06U
Product Description
Full Text Search
 

To Download HMC745LC3C Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Typical Applications
The HMC745LC3C is ideal for: * RF ATE Applications
Features
Inputs Terminated Internally in 50 Ohms Differential & Singe-Ended Operation Fast Rise and Fall Times: 21 / 19 ps Low Power Consumption: 240 mW typ. Programmable Differential Output Voltage Swing: 600 - 1200 mV Propagation Delay: 95 ps Single Supply: +3.3V 16 Lead Ceramic 3x3mm SMT Package: 9mm 2
7
HIGH SPEED LOGIC - SMT
* Broadband Test & Measurement * Serial Data Transmission up to 13 Gbps * Digital Logic Systems up to 13 GHz
Functional Diagram
General Description
The HMC745LC3C is a XOR/XNOR gate function designed to support data transmission rates of up to 13 Gbps, and clock frequencies as high as 13 GHz. The HMC745LC3C also features an output level control pin, VR, which allows for loss compensation or for signal level optimization. All input and output signals to the HMC745LC3C are terminated with 50 Ohms to Vcc on-chip, and may be either AC or DC coupled. Inputs or outputs can be connected directly to a 50 Ohm to Vcc terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to ground. The HMC745LC3C operates from a single +3.3V DC supply, and is available in a ceramic RoHS compliant 3x3 mm SMT package.
Electrical Specifi cations, TA = +25C, Vcc = +3.3V
Parameter Power Supply Voltage Power Supply Current Maximum Data Rate Maximum Clock Rate Input High Voltage Input Low Voltage Input Return Loss Output Amplitude Differential, peak-to-peak Output High Voltage Output Low Voltage Output Rise / Fall Time Differential, 20% - 80% 1100 3.25 2 21 / 19 mVpp V V ps Frequency <13 GHz Single-Ended, peak-to-peak 2.8 2.1 10 550 Conditions Min. 3.0 Typ. 3.3 72 13 13 3.8 3.3 Max 3.6 Units V mA Gbps GHz V V dB mVpp
7 - 146
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Electrical Specifi cations, (continued)
Parameter Output Return Loss Small Signal Gain Random Jitter Jr Deterministic Jitter, Jd Propagation Delay, td rms peak-to-peak, 215 -1 PRBS input [1] 2 95 Conditions Frequency <13 GHz Min. Typ. 10 27 0.2 Max Units dB dB ps rms ps, pp ps
7
HIGH SPEED LOGIC - SMT
[1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215 -1 PRBS input, and a single-ended output
DC Current vs. Supply Voltage
90 85 DC CURRENT (mA) 80 75 70 65 60 55 2.9
+25C +85C -40C
[1] [2]
Output Differential vs. Supply Voltage [1] [2]
1200 DIFFERENTIAL VOLTAGE (mV) 1175 1150 1125 1100 1075 1050 1025 1000 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7
+25C +85C -40C
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
SUPPLY VOLTAGE (V)
SUPPLY VOLTAGE (V)
Rise / Fall Time vs. Supply Voltage [2]
25
tr tf
Output Differential vs. Frequency [1]
1400 OUTPUT DIFFERENTIAL (mV) 1200 1000 800 600 400 2
23 RISE/FALL TIME (ps) 21
19 17 15 2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
4
6
8
10
12
14
16
18
SUPPLY VOLTAGE (V)
FREQUENCY (GHz)
[1] VR = +3.3V
[2] Frequency = 13 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
7 - 147
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Output Differential vs. VR [2]
1400
Rise / Fall Time vs. VR [2]
25
tr tf
1000
RISE/FALL TIME (ps)
7
HIGH SPEED LOGIC - SMT
DIFFERENTIAL VOLTAGE (mV)
1200
23
21
800
+25C +85C -40C
19
600
17
400 2.1
2.3
2.5
2.7
2.9 VR (V)
3.1
3.3
3.5
3.7
15 2.1
2.3
2.5
2.7
2.9 VR (V)
3.1
3.3
3.5
3.7
Input Return Loss vs. Frequency
0 -5 RETURN LOSS (dB)
Output Return Loss vs. Frequency
0 -5 -10 -15 -20 -25 -30 -35
-15 -20 -25 -30 0 2 4 6 8 10 12 14 FREQUENCY (GHz)
RETURN LOSS (dB)
-10
0
2
4
6
8
10
12
14
FREQUENCY (GHz)
[1] VR = +3.3V
[2] Frequency = 13 GHz
7 - 148
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Eye Diagram
[1] Test Conditions: Waveform generated with an Agilent N4903A J-Bert. Rate = 13 Gbps. Eye diagram data presented on a Tektronix CSA 8000. Device is AC coupled to scope.
7
HIGH SPEED LOGIC - SMT
Timing Diagram
Truth Table
Input A L L H H Notes: A = AP - AN B = BP - BN D = DP - DN B L H L H H - Negative voltage level L - Positive voltage level Outputs D L H H L
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
7 - 149
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Absolute Maximum Ratings
Power Supply Voltage (Vee) Input Signals Output Signals -0.5V to +3.7V Vcc - 2V to Vcc + 0.5V +1V to +3.7V -65C to +150C -40C to +85C
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
7
HIGH SPEED LOGIC - SMT
Storage Temperature Operating Temperature
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 7. PADDLE MUST BE SOLDERED TO GND.
7 - 150
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Pin Descriptions
Pin Number 1, 4, 5, 8, 9, 12 Function GND Description Signal Grounds Interface Schematic
7
HIGH SPEED LOGIC - SMT
7 - 151
2, 3 AN, AP Clock / Data Input A
6, 7
BP, BN
Clock / Data Input B
10, 11
DN, DP
Clock / Data Output
13, 16 14, Package Base
Vcc GND
Positive Supply Supply Ground Output level control. Output level may be adjusted by applying a voltage to VR per "Output Differential vs. VR" plot.
15
VR
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Evaluation PCB
7
HIGH SPEED LOGIC - SMT
Item J1 J2 J3 J4 J5 J6 J7 J8 J9
Description AN AP BP BN DN DP GND VR Vcc
List of Materials for Evaluation PCB 122517 [1]
Item J1 - J6 J7 - J9 JP1 C1, C2 C3 - C5 R2 U1 PCB [2] Description PCB Mount SMA RF Connectors DC Pin Shorting Jumper 4.7 F Capacitor, Tantalum 100 pF Capacitor, 0402 Pkg. 10 Ohm Resistor, 0603 Pkg. HMC745LC3C High Speed Logic, XOR / XNOR 122515 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR
The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed package base should be connected to GND. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
7 - 152
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Application Circuit
7
HIGH SPEED LOGIC - SMT
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
7 - 153


▲Up To Search▲   

 
Price & Availability of HMC745LC3C

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X